Product/Service

Cincom E32 -- Tough Parts Made Fast

Source: Marubeni Citizen-Cincom, Inc.
Challenge the E32 with your toughest part -- heavy cuts…hard materials…complex profile…tight specs -- virtually anything that fits its 1.25" diam. x 12.6" per chucking length work envelope

Challenge the E32 with your toughest part -- heavy cuts…hard materials…complex profile…tight specs -- virtually anything that fits its 1.25" diam. x 12.6" per chucking length work envelope. With as many as 40 live and stationary tools on twin turrets serving a main and back spindle, tough parts are made fast, with mirror finishes, and to the tightest tolerances.

Key features include:

Dual spindle, dual turret design

  • maximum versatility for both front and back work
  • randomly selectable spindles and turrets for maximum versatility
  • 16 or 20 mountable tools, live tools at any station
  • 0.2 second station-to-station indexing
  • synchronous-superimposed operation

    32-bit Cincom System III controller

  • on-machine program check/program replay (patented)
  • program checking and editing without changing screen mode
  • work animated simulation helps prevent interference
  • simultaneous background editing or multi-line program
  • one-touch operation for frequently used subroutines

    Units E32 & E32-IV*
    Max. part diameter (in.)=1.25
    Max. part length/chuckin(in.) =12.6
    Spindle motor(Hp) =7.5
    Max. spindle speed(rpm)=6,000
    Back spindle speed(rpm )=5,000
    No. mountable tools= 10+10**
    Controller=Cincom System III

    * E32-IV features a Y axis on the upper turret
    ** more tools possible with half indexing

    Marubeni Citizen-Cincom, Inc., 90 Boroline Road, Allendale, NJ 07401. Tel: 201-818-0100; Fax: 201-818-1877.