Hydrobar Express 326 S2

Specially designed to satisfy your demands, the new HYDROBAR EXPRESS 326 S2 Automatic Bar Feed System will bring success your way.

With the unique advantages of the HYDROBAR EXPRESS 326 S2, the productivity of your lathe, fixed or sliding head will be higher than ever.

• Very short changeover times
  
• Diameter change made in record time
  
• Bar loading cycle takes less than 30 seconds
  Reduced operating costs
  Bar Feed System suitable for large, medium and small production runs
  
• The specially designed guide channel guarantees quiet operation and no vibration at highest rpm
  Maximum spindle rpm for optimum cutting conditions and reduced machining costs
  
• Complete reliability
  
• Unmanned production without any interruption

Quick and Easy

• The ergonomic remote control station, with integrated display, facilitates installation and changeover.
  
• Icons simplify Bar Feed setting
  
• The GE Fanuc Servo drive allows system control and production analysis.
  
• The entering of parameters such as part length, material and pusher diameter, sets automatically :
  
  • 1. optimum feed rate and torque adjustment
    
  • 2. Guiding rest to both the new loading bar diameter and the pusher diameter

Automatic Guiding Steady Rest - NEW

New Motorized Guiding Steady Rest with automatical diameter changeover

SAVING OF TIME -> HIGHER PRODUCTIVITY

• New motor driven guiding rest with automatic diameter adjustment
  Adjustment and changeover made in record time
  
• The V-shaped support blocks cover the diameter range from 3 to 26 mm and are automatically adjusted by entering the diameter on the remote control
  
• Steady rest solidly fixed on the base
  Increased stability and reduced vibration

  LNS America, Inc., 4621 East Tech Drive, Cincinnati, OH 45245. Tel: 513-528-5674; Fax: 513-528-5733.