Jet Edge Exhibiting Precision Water Jet System At WJTA-IMCA Expo Aug. 17-19

Water jet manufacturer Jet Edge, Inc., of St. Michael, Minn., will exhibit its Mid Rail Gantry water jet cutting machine at the 2010 WJTA-IMCA Expo, Aug. 17-19 at the George R. Brown Convention Center in Houston. Look for Jet Edge in Booth 637.

During the WJTA-IMCA Expo, Jet Edge will perform live precision waterjet cutting demonstrations on its Mid Rail Gantry waterjet system. Powered by a 60,000 psi or 90,000 psi Jet Edge waterjet intensifier pump (available in 30-200hp models), the Jet Edge Mid Rail Gantry water jet cutting machine features an exposed tank that easily accommodates overhead loading. It is designed to cut virtually any material. Optional mirroring cuts part cycle time in half. The Jet Edge Mid Rail Gantry water jet system utilizes an industrial PC controller and can be configured so that all three axes are fully programmable (Z optional). It also features direct-couple AC brushless digital servo motors and single or double carriages. Critical bearing components are protected with heavy metal covers with brush seals. The Mid Rail Gantry waterjet system is available in 5'x5', 8'x5', and 21'x5', 8'X13' and 21'X13' and 5'x13' work envelopes.

Jet Edge's Mid Rail Gantry Waterjet System is proudly made in the U.S.A.!

SOURCE: Jet Edge, Inc.