L2P, L5P, L18P Lubricators
Manual Cyclic Lubricators
Bijur "One-Shot" lubricators provide a convenient method of supplying a metered quantity of oil to the machine by simple manual actuation of lever or handle. Applications range from a few points to 100 points.
Operation
The lubricators are operated by pulling the knob (L2P) or by pushing the operating handle down (L5P and L18P), which raises a piston and compresses a spring. Releasing the handle automatically discharges oil into the system. Oil viscosity does not affect discharge volume but may affect system pressure.
System Design
For use with Single Line Resistance (SLR) systems only.
|
L2P Lubricator |
L5P Lubricator |
L18P Lubricator |
|
|
Description |
A small displacement lubricator for compact machinery. |
Manual lubricator for small and medium sized machines. |
Large output manual lubricator for medium and large sized machines. |
|
Proportioning Device |
F Type Meter Units |
F Type Meter Units |
F Type Meter Units |
|
Reservoir Capacity |
200 cc (refill) |
1 pint (475 cc) |
1 liter |
|
Lubricator Inlet Filter |
Inspect periodically and clean or replace regularly |
||
|
Discharge Pressure |
30 psi average |
75 psi maximum |
65 psi maximum |
|
Discharge Volume per Stroke |
1 cc or 2 cc (factory set as specified on customer's order) |
1 cc to 5 cc (lubricator is preset for maximum discharge) |
6 cc to 18 cc (infinitely adjustable, preset for 18 cc discharge) |
|
Viscosity Range |
150 SSU to 8,000 SSU at operating temperature |
150 SSU to 8,000 SSU at operating temperature |
150 SSU to 8,000 SSU at operating temperature |
|
Systems and Limitations |
Up to 15 lube points |
Up to 35 lube points |
Up to 75 lube points |
Bijur Lubricating Corporation, 50 Kocher Drive, Bennington, VT 05201. Tel: 802-447-2174; Fax: 802-447-1365.