Product/Service

Milling Machine

Source: CMS/Upgrade Technologies

Milling Machine
The VMC-1 milling machine is a three-axis machining center with guideways built on prismatic rails and
CMS/Upgrade Technologiesilling machine is a three-axis machining center with guideways built on prismatic rails and needle cages to eliminate stick-slip phenomena. Position control is ensured by incremental encoders, and the cross slide is driven by constant torque motor and worm screws with precision bearings. Models are available with a standard 6,000 rpm spindle or an optional 40,000 high frequency spindle.

<%=company%>, 638 N Poinsettia, Santa Ana, CA 92701 Phone: (714) 664-8800 Fax: (714) 664-0860