Model 860 Front Load Washer

The Model 860 is another series available in the high pressure, low volume type washers offered by ADF. This front load model is usually used for taller parts as it provides standard height clearances of 36 and 48 inches. Other height clearances can be provided on a custom basis. Parts can be self supporting or fixtures can by used to support tall parts.

Construction of this washer is for heavy duty and continuous operations and utilizes 304 stainless steel for the spray chamber and reservoir tank.

There are a variety of options available for the washer, including drying, rinsing, oil skimming and electronic controls. By choosing the proper option, you can tailor the washer for your requirements.

Biodegradable detergents and hot water are the cleaning solution used. Which provide a safe and environmentally friendly solution. ADF detergents include rust inhibitor for steel parts and is safe on other materials such as brass, aluminum, stainless steel, copper, rubber, plastic or glass.

Filtration of the wash solution is standard with this model, including a primary 100 micron felt blanket filter and a secondary cartridge system. With ratings of 3, 5, 10, 25 and 50 micron, the customer can choose the proper cartridge for his requirements.

Safety features are included for the washer and the operator. The Washer is equipped with a safety switch so the machine pump is shut down if the machine door is opened during operation. All controls are fused 115 volt with electrical panels located for operator convenience.

ADF Systems Ltd, 1302 19th Street North, Humboldt, IA 50548. Tel: 515-332-5400; Fax: 515-332-4475.