Model PMD Dual Head Milling Machine
Source: Leland-Gifford, Inc.
Dual heads permit two simultaneous machining operations. Rigid reinforced construction with wide dovetail slides and adjustable gibs provide for accuracy and long life.
Features
Dual heads permit two simultaneous machining operations. Rigid reinforced construction with wide dovetail slides and adjustable gibs provide for accuracy and long life. Anti-friction, pre-loaded type bearings support a hardened and ground spindle. The standard spindle is hollow and precision ground to take standard 3-C collets from 1/16 inch to 1/2 inch diameter. Columns and heads may be positioned independently.
Dual heads permit two simultaneous machining operations. Rigid reinforced construction with wide dovetail slides and adjustable gibs provide for accuracy and long life. Anti-friction, pre-loaded type bearings support a hardened and ground spindle. The standard spindle is hollow and precision ground to take standard 3-C collets from 1/16 inch to 1/2 inch diameter. Columns and heads may be positioned independently.
- Standard Equipment
- Hand lever feed on vertical head movement only
- Transverse column movement and table positioning manually
- 1/3 HP, 1725 RPM, single phase, heavy-duty, ball-bearing, totally enclosed fan-cooled dual voltage motors with reversing switches, belt guards and machine light
Optional Equipment - Available At Extra Cost
- Micrometer-feed screws to all motions
- Air hydraulic feed to all motions
- High speed spindles
- Coolant systems
- Riser blocks
- Variety of special motors with range of HP and RPM
- Special column slides for longitudinal movement
- Cabinet base
Leland-Gifford, Inc., 1497 Exeter Road, Akron, OH 44306. Tel: 330-794-1960; Fax: 330-794-9912.