Product/Service

Mold Tooling

Source: Toshiba Tungaloy America, Inc.
The Jetmill series of tools has been expanded into the mold tooling area by
The Jetmill series of tools has been expanded into the mold tooling area by Toshiba Tungaloy. The new line includes standard tools with special functions such as contour cutting, profiling, chamfering, ramping, and holemaking. Among the offerings is the ECC chamfer mill for deburring and/or hold chamfering from 0.200 to 1.770 in. diameter with a single tool.

Also included is the omni-directional ESD mill, which can plunge up to 9 mm deep, contour, profile, and even interpolate a helical path. Two sizes, 1 in. and 1 ½ in., cover the majority of machining needs.

The ERD group of mills, utilize round inserts with wiper flats. These permit smooth transitional cutting in parts where curves have to be generated and surface finish must be maintained to minimize subsequent operations. This group of cutters is available in ¾ in, 1 in., and 1½ in. effective diameters as endmills and up to 4 in. in shell mill cutters.

All Jetmills utilize Tungaloy's new Flash Coat grades, coated in TiAlN, for added wear resistance at the high speeds typical of these operations.

Toshiba Tungaloy America, 1375 East Irving Park Road, Itasca, IL 60143 Phone: (800) 542-3222