Product/Service

Probe System for Machining Centers

Source: Renishaw Inc.

Probe System for Machining Centers
The MP10 probing system is designed for workpiece setup and inspection on small- to medium-sized CNC machining centers
Renishaw Inc.o improve productivity by allowing the automatic setting and inspection of components, the MP10 probing system is designed for workpiece setup and inspection on small- to medium-sized CNC machining centers. For use on vertical and horizontal machining centers, the device is suitable for use on high-speed machines with no spindle orientation and can be used with single- or double-touch probing routines.

The system employs 360-degree infrared optical transmission (at 35- and 70-degree angles), offers ±X-Y-Z probing directions, and is certified at 480 mm/min. Sealed to IP68 and shock and vibration resistant, the unit can be specified as standard equipment and can be retrofitted to existing machining centers.

<%=company%>, 623 Cooper Ct., Schaumburg, IL 60173. Tel: 847-843-3666; Fax: 847-843-1744.