ProCAM Wire EDM

PartnersLocate Reseller EmploymentHomeWire EDMEventsProCAM Wire EDM

ProCAM Wire EDM provides 2 through 4 axis modeling and cutting.

Features:

Supports modeling and toolpath calculation of 2 through 4 axis parts.

Two axis parts can be modeled with constant or variable tapered angles with numerous user-defined corner transitions.

Toolpaths can be generated using finishing, skim cutting cycles and core removal with tabs, glue stops and start holes.

Multi-pass skim cuts can be programmed with automatic tab cut calculation.

Inserts wire thread/wire cut commands automatically, if supported by CNC machine.

Supports elliptical compensation of 4-axis wire toolpaths.

Supports taper/offset/power changes anywhere along the calculated toolpath.

Teksoft, 16121 North 78th Street, Scottsdale, AZ 85260. Tel: 480-367-0132; Fax: 480-367-0420.