Scepter Cylindrical Grinding Machines
A fine example of American craftsmanship, our C1020L2 and Scepter Cylindrical Grinders are built 100% in the U.S.A. and designed to provide an uncomplicated grinding system at an economical price. Both models feature annealed cast-iron construction throughout the entire machine, including the base, wheelhead, saddle and table. This quality construction provides the C1020 & Scepter with a lifetime of stability and accuracy. The special saddle infeed construction and table features a pre-loaded anti-friction way system, for extreme accuracy of movement.
Scepter
K.O. LEE's SCEPTER is a Precision CNC Cylindrical
Grinding Machine designed for fast setup and grinding
of multi-diameter parts at a very economical price.
The SCEPTER is equipped with a NUM 1020 CNC
control which provides simultaneous movement of
the machine's two (2) axes. The table and wheelhead
axes are driven by AC Digital servo motors via precision
ground ballscrews.
The wheelhead axis is equipped with linear glass scale
feedback for increased accuracy. The SCEPTER offers
a grinding capacity of 10" (250mm) swing with
20" (500mm) between the machine to be used for
center and chuck work.
Machine accuracy is improved by the use
of pre-loaded linear guideways on the table
and wheelhead axes. All linear way bearings
and ballscrews are lubricated by a central air/oil
lubrication system, providing positive pressure
protection to these critical areas. A 5-HP (3.75 kw)
spindle motor drives the machine's 14" (350mm)
diameter grinding wheel.
The SCEPTER control provides graphical
representation of grinding and dressing cycles
for quick and easy setup. A standard 2D CAD
package enables the control to be programmed
at the machine for complex wheel forms and
contour generation on the workpiece. Background
programming is also available as well as up-loading
and down-loading via the RS 232 port.
C1020L2 & Scepter Standard Equipment and Features
- 5-HP wheelhead motor
- 14" x 1-1/2" x 5" (350 x 38 x 127mm) grinding wheel with wheel collet and balancing weights
- 50-gallon paper roll filter coolant system
- Live and dead center headstock with 1/3-HP variable speed motor and 5MT/3MT center adapter
- Low lube automatic shut-off
- Light fixture
- Individual dwell control at each end of table reversal
- Adjustable spring loaded tailstock with 3MT center
- Precision ballscrews on both axes
- Hand pulse generator
- Internal grinding attachment
- Renishaw probe for shoulder location
- In-process diameter gauging
- Electronic gap eliminator
- 5C collet assembly with handwheel and draw tube
- Table mounted wheel dresser
- 6" Adjust-Tru 6 jaw chuck assembly
- 8-1/4" Adjust-Tru 6 jaw chuck assembly
- Follow rests with two support points, either solid-stop or spring-loaded, range is 1/4" to 5"
- 5C air collet closure
- 16" wheel balancing kit
- Circular magnetic chuck
- SBS wheel balancing system
K.O.LEE grinders are built from high quality castings. Each machine is designed, manufactured and assembled at the same location. A thorough inspection is performed by a Quality Assurance team, during and after machine build. In-house run-offs and quality inspections by the customer are welcomed. Please contact K.O.LEE Company for more information
K.O. Lee Company, 200 S. Harrison, Aberdeen, SD 57401. Tel: 605-225-5820; Fax: 605-225-7267.